HZS180 commercial concrete mixing plant configuration

An HZS180 commercial concrete mixing plant is a complete production line for concrete production. Boasting a large production capacity and high application range, it is composed of a mixing host, a batching machine conveying system, a control system and a metering system.

　　Productivity

The 180 plant is a relatively large-scale commercial concrete mixing plant at the present stage. The HZS model means a concrete mixing station in the form of a double-horizon mainframe, and 180 means that the equipment produces 180 square meters of concrete per hour. Of course, this production volume refers to the theoretical production volume, that is, the production can be reached at full capacity without time consumption.

　　Mixer

The type of mixing machine used in HZS180 concrete batching plant is JS3000 double-shaft forced mixing main machine. The stirring arm of the stirring device is streamlined in both axial and radial directions. In the mixing process, not only the material is radially cut but also The axial pushing action can make the material agitation more vigorous and easier to achieve a uniform effect. The main machine can mix 3 squares of concrete each time, that is, the main production is the production of concrete per tank. The production time of ordinary concrete per tank is 60 seconds. The continuous operation of the equipment can achieve the production effect.

　　Distributor

The batching system is the PLD series 3200 batching machine equipment, and is equipped with 4 batching buckets. Each batching bucket can be pre-loaded with 20 square aggregates, which can be matched with four medium aggregates, and the individual type electronic scales are used for material measurement and accurate measurement. Precise ingredients can be produced under the control of a microcomputer. The exact value of the ingredients was 2%, and the electric belt conveyor was used to carry out the batching and unloading.

　　Cement Silos

In general, the HZS180 concrete mixing plant production line uses four 200-ton cement silos as cement storage equipment to store the amount of cement and fly ash required for full-load production. If some concrete manufacturers are close to the cement plant, they can use 100 tons or 150 tons of cement silos.

　　Control System

The control system of the 180m3 commercial concrete batching plant is controlled by industrial microcomputer, with detailed matching standard and timely printing function, and can store various concrete model matching standards, and record the production situation in detail, and at the same time, the whole station can be Planning and design of the operation. There are also monitoring systems at key production points to monitor production processes and production in real time.

In short, the HZS180 concrete mixing plant production line is a large-scale concrete automatic production equipment, with various automation functions such as proportioning automation, production automation, unloading automation, etc. It can automatically produce various proportions of concrete, which is the preferred model for the majority of commercial users.

Reprinted from http://www.ready-mix-plant.com/hzs180-commercial-concrete-mixing-plant-configuration/